ASTM A500A
Standard specification for welded and seamless structural tubing
OD Tolerance:
+/- 0.5%
Wall Tolerance: +/- 10.00%
Minimum Yield: 33,000 PSI
Minimum Tensile: 45,000 PSI
| Chemical Requirements: | C (max) | Mn (max) | P (max) | S (max) | Cu (min) |
| Seamless | .26 | 1.35 | .035 | .035 | .20 |
Flattening Test
ASTM A500B
Standard specification for welded and seamless structural tubing
OD Tolerance: +/-
0.5%
Wall Tolerance: +/- 10.00%
Minimum Yield: 42,000 PSI
Minimum Tensile: 58,000 PSI
| Chemical Requirements: | C (max) | Mn (max) | P (max) | S (max) | Cu (min) |
| Seamless | .26 | 1.35 | .035 | .035 | .20 |
Flattening Test
ASTM A500C
Standard specification for welded and seamless structural tubing
OD Tolerance: +/-
0.5%
Wall Tolerance: +/- 10.00%
Minimum Yield: 46,000 PSI
Minimum Tensile: 62,000 PSI
| Chemical Requirements: | C (max) | Mn (max) | P (max) | S (max) | Cu (min) |
| Seamless | .23 | 1.35 | .035 | .035 | .20 |
Flattening Test
ASTM A500D
Standard specification for welded and seamless structural tubing
OD Tolerance: +/-
0.5%
Wall Tolerance: +/- 10.00%
Minimum Yield: 36,000 PSI
Minimum Tensile: 58,000 PSI
| Chemical Requirements: | C (max) | Mn (max) | P (max) | S (max) | Cu (min) |
| Seamless | .23 | 1.35 | .035 | .035 | .20 |
Flattening Test