A500 Pipe

Omega Steel offers a wide-range of A500 pipe products. Our structural tubing inventory extends to outside diameters up to 30” with wall thicknesses up to .625”. While most of our A500 pipe material is ERW, seamless structural tubing is available upon special request

Common Uses:

- Structural applications
- Bollards
- Micro-piling

Email Skip Palazzolo | 314.595.5020

Product Spec Guide:

Chemical Composition%(heat analysis/product analysis)

	C	Mn	P	S	Cu*
Grade A:	.25	1.00	.035	.035	.035
Grade B:	.26	1.00	.035	.035	.035
Grade C:	.28	1.20	.035	.035	.035
Grade D:	.30	1.30	.035	.035	.035
Grade E:	.30	1.40	.035	.035	.035

For each reduction of .01 percentage point below the specified maximum for carbon, an increase of .06 percentage point above the specified maximum for manganese is permitted, up to a maximum of 1.50% by heat analysis and 1.60% by product analysis.

Chemical Composition%

	C(max)	Mn	P(max)	S(max)	Si(min)	Cu*(max)	Ni*(max)	Cr(max)	Mo*(max)	V*(max)
Grade A:	.25	.27-.93	.035	.035	.10	.40	.40	.40	.15	.08
Grade B:	.30	.29-1.06	.035	.035	.10	.40	.40	.40	.15	.08
Grade C:	.35	.29-1.06	.035	.035	.10	.40	.40	.40	.15	.08

For each reduction of .01% below the specified carbon maximum, and increase of .06% manganese above the specified maximum will be permitted up to a maximum of 1.35%.

*These five elements combined shall not exceed 1.65% total composition (2010)

OD Tolerance:

OD Tolerance: +/- 0.5%
Wall Tolerance: +/- 10.00%

Minimum Yield/Tensile

	Min.Yield	Min. Tensile
Grade A:	33,000 PSI	45,000 PSI
Grade B:	42,000 PSI	58,000 PSI
Grade C:	46,000 PSI	62,000 PSI
Grade D:	36,000 PSI	58,000 PSI

Wall Tolerance